Description
All JDC titanium parts are hand polished and/or brushed before being colored in house using our proprietary six step cold anodizing process to ensure the most vibrant colors on the market! All of our hardware is CNC machined from the strongest Ti6Al-4V (Grade 5) titanium and all heat shields and other products are laser cut and CNC bent for smooth edges, and a precise fitment every time. Titanium is around 45% lighter, much stronger, and will not corrode like your stock hardware. Since each piece is colored as it is ordered, please allow a slight variance between shades and patterns.
Titanium Maintenance & Care:
Titanium is one of the coolest metals on earth, but just like any metal, it requires proper care.
Titanium is sensitive to oils from your hands and some other elements in the environment, which might seem to discolor or fade the anodized coating, but don’t worry! The anodized coating is just as strong as the metal itself.
Installation:
When installing titanium parts, it’s a good idea to wear a set of gloves to keep the oil from your hands off the part. Make sure to clean the part after installation before any heat is applied to ensure the oils are not baked on the part.
Cleaning:
If you do need to clean your titanium parts, wash with soapy water and dry with a microfiber towel. You can also use Windex or rubbing alcohol and rinse with water. We do not recommend using any harsh chemicals like engine degreaser, water spot remover, or brake parts cleaner. You should also never use any type of metal polish. A polish can lighten or completely remove the oxidized layer on the part, leaving it colorless.
Important: Make sure your titanium parts are cool to the touch before attempting to clean them. Spraying water or chemicals on a hot part may cause water spots to appear on the surface, which can be hard to remove without tarnishing the colored finish.
